Shrewd Optum 40 mm Scope
Out of stock
// = /* @escapeNotVerified */ $_attributeLabel ?>Item Number
30-40110
The Optum takes the versatility and features Shrewd Scopes are known for to the next level. With more adjustability than any other scope in our line; The Optum packs all the features of the Nomad platform into an efficient and easy to use package. The hassle of changing pin positions, installing a light kit, and swapping fiber is gone. The Optum series are the epitome of adjustable efficiency.
Features:
Includes:
Compatibility:
Features:
- Adjustable fiber cover offers precise control over the pin brightness
- three 8-32 threaded holes allow easy installation of a light kit right out of the box in seconds
- Two of the light positions illuminate the fiber
- One light position illuminates a dot on lenses or fiber in centered drilled lenses
- 8-32 threaded light ports are compatible with Schlite, LP, and Zbros light systems
- Eight pin positions that can be changed in seconds with the Optum ring system
- Pin position indicator offers a quick reference for repeatability
- Optional sunshades that can be threaded on either side of the scope
- Keyway slot for the pin ensures it always remains in place and aligned correctly
- 7/16"-20 plug closes the large hole typically found on the side of scopes for complete light control
- Mounting pocket accepts square and hex scope rods to prevent the scope from rotating
- Specific scope rods for Axcel, Spot Hogg, and Sure-Loc are available
Includes:
- Scope body
- Green, red and blue levels
- 10-32 x 2" and 10-32 x 1.25" button head screws
- 1/16" allen wrench
- 7/16"-20 Delrin plug
Compatibility:
- B3 - Requires the use of the 10-32 x 1/2" button head screw that comes stock with the B3 sight when mounthing the scope.
- Axcel - Can mount to the stock Axcel scope rod but will require a 10-32 x 2.5" button head bolt or the stock scope rod can be replaced with a 1/2" Shrewd scope rod.
- Spot-HOgg - Requires a 3/8" Shrewd scope rod.
- Sure-Loc - Can mount to the stock scope rod but may require a 10-32 x 2.5" button head bolt or the stock scope rod can be replaced with a 3/8" or .455" scope rod depending on the sight model.